Unload a vehicle at the garage

Prepare the receiving route first

A bigger vehicle can collect a load without giving that load anywhere to go. Before a long cleaning trip, identify the garage's unloading side and complete its output connection.

The garage's vehicle bay and the left-side unloading position serve different purposes. The reported dust-unloading instruction is to use the ramp beside the door, not simply to return to the main bay.

Bring the load into position

1. Return with dust still in the vehicle.
2. Approach the left ramp and drive onto it.
3. Stop centrally under the pipe and watch whether the pipe lowers.
4. Check that material leaves the receiver on the connected conveyor, then follow the route to its destination.

Separate positioning from a blocked output

• If the pipe never lowers, recheck the side of the garage and the stopped position. The discussion does not establish a universal terrain-placement repair.
• If the vehicle empties but nothing sells, investigate the outgoing route. Unloading and payment are separate events.
• If the vehicle itself is unavailable after a garage change, use the current-version recall guide rather than buying it again immediately.